Multiples
CAST FLOWS

DESCRIPTION: Flows cast in a stone and Jesmonite mix from a hand-built original - either from a mould we have already made or from one built to your specification. By using an existing mould, cast Flows can be produced very quickly at short notice.

IDEAL SETTING:

Indoor:

• Perfect for kitchens and bathrooms as the panels are water resistant and are very responsive to contemporary lighting techniques.

• Light and easily installed.

• When many repeats of the same design required.

• A large surface requiring a repeating design.

  
  Outdoor:

• Suitable for all weathers and climates, including sea air. Can be used on terracing, swimming pool areas, beach front cafes and even on the decks of a ship.

• When many repeats of the same design required.

• A large surface requiring a repeating design.

SIZING:

If you only require one Flow in a bespoke size - it is best to use a current design cut down. There are two panels available.

'Stream'
Cast to order in any colour or stone, can be repeated in the same single design.
152 x 54cms

'Swell'
This panel has a continual pattern when repeat-mounted, or it can be cut down to a required size.
116 x 105cms

SHIPPING: Packed in crates and put on pallets for easy manoeuvring.

PRESENTATION OPTIONS

Cast Stone Flows

Panels of Flow are cast to order in any colour or in a stone aggregate with Jesmonite and are reinforced with fibre-glass for strength.
 

Designs

It is possible to have a bespoke master Flow made for casting (though this will incur significant extra expense); please discuss your requirements.

We currently have two available designs:

STREAM - this panel is 152 x 54cms and has an integral frame in the cast so can be left unframed.

SWELL - this panel has a continual pattern when repeat-mounted. Size is 116 x 105cms, or it can be cut to a specified size. This panel has no cast frame so requires either framing or setting into the surface of the wall.
 

Appearance

Metal sheen - By mixing metal into the Jesmonite and polishing back afterwards, the Flow can be given a metallic appearance.  

Stone - ground stone aggregates are mixed in to give Jesmonite a stone finish. By etching the cast, it is possible to make the aggregates stand out and give a rougher, more stoney appearance.

Colour - colour is mixed into the Jesmonite and can be matched to your specification.

STREAM

Integral Frame

Stream can be left unframed or a frame in metal/wood can be build around the cast.

SWELL

Entire panel

Slightly off square, Swell can be mounted any way round. (Shown in white marble).

Repeat mounting

If all panels are mounted the same way round, the Flowing pattern continues across the wall.  Shown here tightly mounted together, they can also be mounted with a shadow gap.

Open Edge

In order for the Flow pattern to continue, the panel does not have an integral frame border.  For a neat finish, the panel can be framed with wood/metal or sunk into the wall surface. 

FINISHES

Colours

Some of the tests have been half etched to show the difference between a smooth and rough surface.